Guangxi solar street lamp
Your current location : Home >> News >> Industry news

ContactContact Us

Guangxi guangtuo New Energy Technology Co., Ltd

Name:Fu Mr

Mobile:133-7715-5699

E-mail:3071737961@qq.com

Address:Room 1401, Songyu Times, 53 Baisha Avenue, Jiangnan District, Nanning

Factory:10 Xinggang Road, Xinning Town, Fusuxian County, Chongzuo city

Website:en.gxgtxny.com


Installation steps and precautions of solar lawn lamp

2020-10-09 10:55:58
a

Solar lawn lamp is beautiful and can be illuminated, and there are many colors of lights. It is more and more common in our life, but most people don't know how to install solar lawn lamp? The following is a detailed understanding of the following details with the small compilation of Guangxi solar street lamp:


Solar lawn lamp wholesale


(1) First, clean up the sundries around the installation site.


(2) Place the solar lawn lamp base in a suitable position, and then place the lawn lamp on the base, align the holes between the two, and tighten the screws to make it stable.


(3) At this time, the solar lawn lamp and its base have been fixed, put it completely on the foundation, and pay attention to the one with the solar cell facing the south. Then align and tighten the connection hole under the base with the hole on the foundation.


(4) At this time, the power can be connected to check whether the solar lawn lamp can be used normally.


(5) After confirming that the solar lawn lamp has been installed and can be used, the dust and dirt on the lamp should be wiped with clean water dipped in soft cloth. Check whether the lamp is damaged or scratched, and replace it if necessary.


There is also a problem with the spacing between the solar lights. If in the pavilion, trees more places, can be separated a little bit, more installation, in order to obtain better lighting effect.


At the beginning of installation, open the lamp shell and install the power supply and other accessories. Lead out the outgoing line from the threading hole to the bottom of the lamp post, and then connect the lamp cap with the lamp pole. Pay attention to tightening the screws, and then align the lawn lamp flange with the screw of the embedded parts of the foundation, and stand vertically. Then use the nut or leveling to tighten the mounting nut.


Lawn lamp wiring should be safe and reliable grounding. A wire no less than the distribution phase line should be used as the grounding wire to connect the metal shell of the lamp or lamp post, and the ground wire should be connected to the "ground" of the system. The grounding electrode of lamp pole must be welded firmly, and the joint shall be lined with tin. When connecting the PE protection line of street lamp power supply with the grounding wire of lamp pole, the spring gasket must be used to press the top, and then screw on the nut.


Finally, pay attention to the spacing when installing lawn lamps, so as to achieve better lighting effect and better cost saving. Of course, the installation of lawn lamp should also be decided according to the specific situation. The installation of lawn lamp needs to consider various problems. Users need to pay attention to choosing good quality tools. Lawn is generally wet, so we should pay attention to have a certain preventive effect when choosing lamps and lanterns. If the lawn lamp is installed well, it can ensure the good installation effect, at the same time, it can also play the safety effect, so as to better play the use effect.


The above is about the solar lawn lamp installation steps and precautions, I hope to help you.

The last: None

0771-3399859

Marketing Center:Guangtuo Group, Room 1401, Songyu Times, 53 Baisha Avenue, Jiangnan District, Nanning city

Production base:No. 10 xinggang Road, China ASEAN Nanning Airport Fusui Economic Zone

Website:www.gxgtxny.com


Copyright © 2020 Guangxi guangtuo New Energy Technology Co., Ltd All rights reserved 桂ICP备16001459号-4
Mainly engaged in  Guangxi photovoltaic power generation Guangxi hot water project Guangxi solar street lamp Welcome to inquire!