Air energy heat pump

Guangtuo air energy heat pump

Heat pump is a kind of device which can make heat flow from low heat source to high heat source by using high heat source. At present, China's main use of heat pump technology, according to the low heat source is divided into: water source (seawater, sewage, groundwater, surface water, etc.) heat pump, ground source (including soil, groundwater) heat pump, and air source heat pump.

A heat pump can extract heat from a cold source for heating. The heat supply of a heat pump is far greater than the mechanical energy it consumes, so the heat pump technology is an energy saving technology of low temperature waste heat utilization. When introducing heat pump technology into people's lives, experts also defined some simple terms, such as COP (performance coefficient of heat pump), in order to make people better understand this new technology.

Daily maintenance of air source heat pump

1. Air source heat pump water heater is a high degree of automation equipment, the use of regular unit status check, if the unit can be long-term effective maintenance and maintenance, the operating reliability and service life of the unit will be unexpectedly improved.

2. Frequently check the working condition of each part of the unit, check whether there is oil in the pipe joint and gas valve of the unit, and ensure that there is no leakage of refrigerant.

3. Cleaning the condenser of the main engine, it is recommended to use the hydrothermal phosphoric acid solution of 50℃-60℃ with the concentration of 15% to clean the condenser every two years, start the main engine with circulating water pump for 3 hours, and finally clean the condenser with tap water for 3 times. In case of cleaning. Do not clean the condenser with corrosive cleaning solution. The water tank needs to be cleaned of scale after a period of use (generally 3 months, depending on the local water quality).