Although the new rural solar street lamps are widely used, they also need to pay attention to maintenance in the later use process:
1. Before lifting rod, check whether the fastener is strong parts and lamps are installed correctly, no matter for normal light work. Simple debugging system to normally release the solar panel on the control cable; The cable is connected to the solar panel, and the change of the index is carefully observed on the controller at the same time, which belongs to normal installation before lifting;
2. Pay attention to safety precautions of the hoisting rod and tighten the screws well. Wrong views of components, such as: the Angle towards the sun, and finally need to adjust its south direction;
3. The fixed components of each part of the solar street lamp fix the solar panel, the solar panel, the lamp holder fix the arm, then pick up the bracket arm and the fixed main pole, and insert the cable into the control box and battery box;
4. the battery into the battery compartment according to with the cable connected to the controller, technical requirements for the battery to withstand the load, and then take the solar panels, must pay attention to when connected to the controller in each terminal superscript should not wrong, collision, the positive and negative poles should not take the wrong connection, otherwise the controller will be damaged.
5. Normally debug the system, release the control cable, which is connected to the solar panel. At the same time, the controller carefully observes the change of indicators, and tests completely before closing the control box, so as to avoid other faults.