The installation of solar street lamps in Guangxi should be carried out by professionals or experienced installers in order to ensure the later use. Here are some installation considerations:
When installing solar street lamps, first fix the lamp head on the lamp arm, then install solar panels and lithium batteries, and finally fix all the components on the main pole, and tighten the screws. Before the street lamp is hoisted, check whether the standard parts in each position are solid, whether the lamp is installed properly and whether the lamp source works normally. Then whether it is normal in the work of the simple regulation system software; Connect the battery and the lamp holder, and the light source will light up automatically. Then connect the solar panel line, the light source automatically extinguished;
Observe whether the self-test indicator light on the controller is normal. If it is normal, it can be lifted and installed. When hoisting the main street lamp, pay attention to safety protection; Screw to tighten, such as component chaoyang Angle of error, must come up to adjust its Chaoyang azimuth is completely due south. Put the battery into the rechargeable battery box and connect the electrode connection line to the controller according to the technical standards; First connect the battery, then connect the load, then connect the hollow sun plate; In the actual operation of wiring, it is necessary to pay attention to the wiring and the wiring terminal row marked on the control board can not be connected wrong, positive and negative optical rotation can not collide, can not be connected wrong; Otherwise the controller will be destroyed. Whether the software of the regulating system works normally; Loosen the electrode connection line of the hollow sunlight plate on the control board, and the light is on. Connect the hollow sunshine plate electrode connection line, the lamp is off; Together by observing the change of each display light on the controller; If all goes well, you can fix the controller.